Modern products
They are water treatment products. The use of water in industrial processes results in the formation of deposits of many types of salts (calcium, magnesium, etc.), which cause many corrosion problems in water treatment systems (cooling towers, boilers) and desalination systems. Solving the problem of deposits results in lower maintenance costs and increased process efficiency.
Antiscalants can be supplied directly from their packaging and/or dissolved in softened water. The best point to feed the product is in the deaerating feed tank or in the boiler water stream. The dosage depends on the characteristics of the feed water and the operating parameters of the boiler.
They are mixtures of corrosion inhibitors for various construction materials, such as iron, copper, and various alloys. Their purpose is to delay the onset and spread of corrosion across the entire surface of construction materials.
Corrosion inhibitors can be supplied directly to the closed water system, thus allowing their corrosion-inhibiting action to take effect. The dosage of these products depends on the properties of each system. Studies are conducted for each different application in order to determine the optimal dosage.
Available in sealed 25lt containers, 60 and 200lt barrels, and 1000lt tanks.
They contain oxygen scavenging agents in high concentrations. The product is specifically designed to control and minimize corrosion caused by dissolved oxygen in the feed water of steam generation systems.
They can be supplied directly and/or dissolved in feed water. The best feed point is in the deaerating feed tank or in the water stream. The dosage depends on the oxygen concentration in the feed water and the required amount of residual product that should remain in the water. Studies are carried out for each application to find the optimal dosage.
Available in sealed packages of 25lt, in barrels of 60 and 200lt and in tanks 1000lt.
These are products that aim to reduce the bacterial population and biological coatings in water cooling systems.
The product dosage depends on various parameters, including the characteristics of the cooling system.
Available in sealed packages of 25lt, barrels of 60 and 200lt and tanks of 1000lt.
They consist of polymers that tend to inhibit the accumulation and sedimentation of particles while improving the separation process. This prevents the precipitation of particles, such as salts, in water treatment systems.
Depending on the products, different methods of use are recommended in terms of both preparation and dosage. Appropriate measurements are taken to calculate the optimal dosage of the products.
They are available in various packages, depending on the customer’s needs.