The mechanical, fully automated electronic grease collectors, whose operation is based on an automatic mechanism for collecting and removing fats, oily substances and solids from the aqueous phase of the waste.
Gravitational separation fat collectors, whose function is based on the gravitational separation of fats, oily substances from the aqueous phase of the waste.
General description
ENVICHEM has a wide range of laboratory control instruments for water and waste applications, such as Controllers pH, Dissolved Oxygen and Conductivity, which can meet the needs of the customer.
General description
Metering pump systems are widely used in industrial plants as they accurately provide chemical substances in the main process, such as chlorination of water for neutralization of the microbiological load. This avoids chemical waste and the main process takes place under optimal conditions.
General description
High-quality structures that are fully automated and provide all the necessary information to the user. There is an automatic switching circuit for the pumps as well as a flush switch for the protection of the unit in case of water absence.
General description
They aim at purifying the water by absorbing the various waste substances when the water is leaked through the packed bed of absorbent materials.
General description
They aim at purifying water and improve its quality.
General description
They aim at purifying water from solid particles. This is achieved by using quartz sand with a particle size of 0.4-6mm as a packed bed in special containers. This packed bed is divided into several layers depending on the size of the granules. The optimal operation of the processing system is ensured by an automation system.
General description
They aim at softening water by removing salts, mostly calcium and magnesium. This is achieved by the use of a high performance cationic ion exchange resin as packed bed in special vessels. The optimal operation of the softening system is ensured by an advanced automation system.
General description
They are available in various sizes and capacities. The direct separation of the oil from the aqueous phase prevents the emulsification of the fats and their solidification when cooled which reduces the waste management costs. These devices are made of durable materials in both oxidizing and corrosive conditions, resulting in long functional life and reduced maintenance costs.
General description
They aim at purifying the water by absorbing the various waste substances when the water is leaked through the packed bed of absorbent materials.
General description
They aim at purifying water and improve its quality.
General description
They aim at purifying water from solid particles. This is achieved by using quartz sand with a particle size of 0.4-6mm as a packed bed in special containers. This packed bed is divided into several layers depending on the size of the granules. The optimal operation of the processing system is ensured by an automation system.
General description
They are systems which operate at the optimal conditions for preparing polyelectrolyte solutions. They have a conical reservoir in which powdered polymer is delivered inside the system, by using vibration. On the next phase, clean water is inserted with a metering pump in order to determine and control the concentration of the polyelectrolyte final solution.
General description
They are plastic cone tanks that are available in various sizes, including a stirrer. These tanks carry out the flocculation of the soluble waste and its precipitation together with the insoluble waste. The result is a two-phase water-waste mixture with the water as supernatant.
General description
It uses ultra-low volume (ULV) nozzles, spraying the substances, creating a very large number of droplets, of average standard diameter of 15-20 μm, in the air. They are characterized by low operating costs of utility water and electricity supplies. They have a fully adjustable system able to increase or decrease the deodorization capacity, depending on environmental conditions (high temperatures – greater need for deodorization due to more intense odor).
General description
They are ultra low volume nozzles, with adjustable capabilities, depending on the application requirements.
General description
It aims at neutralizing infectious microbes in water without the use of chemicals. This is achieved through ultraviolet radiation, which is caused inside the device and destroys the genetic material of microorganisms, bacteria and viruses. The device is made of stainless steel. As a result, the water is sterilized and ready for use.
General description
A wide range of synthetic filter materials is available for the treatment of drinking water. Centrifugal force results in the precipitation of large particles, thus improving the quality of water. This protects the piping network and the equipment of the water treatment plants from deposits, preventing large maintenance costs.