• envichem

Cleaning

General description

They consist of a mixture of chelating agents, wetting agents and surfactants in alkaline solution and aim at cleaning the reverse osmosis membranes from inorganic and organic deposits.

Suggested Uses

  • To prevent and reduce the precipitation effect of potassium, magnesium, strontium, barium and iron salts.
  • The product is specific for superficial water, well water, sea water or waste water.
  • For the removal of colloidal, carbonate, sulphate and fluoride deposits.

Application

It is recommended to dilute the membrane cleaning products with good quality water, recirculate the solution to the membrane system for a long time, keep the solution in the system for 1-2 hours and finally remove it using again good quality water. The temperature should be between 30-35 oC throughout the cleaning process.

General description

They are chemical scouring cleaners that aim at cleaning and protecting against corrosion of metal surfaces. By using these products, the corrosion of metal walls is prevented, reducing the cost of maintenance of the devices and extending their life span.

Suggested Uses

  • Removal of deposits, organic and inorganic compounds, from metal walls and surfaces.
  • Protection against corrosion of metallic surfaces due to deposits.

Application

Depending on the product that corresponds to each case, different application and different dosages are suggested. In each case the optimal dosage of the product is calculated in order to more effectively manage the problem.

General description

They are products that act as detergents, disinfectants and deodorants at the same time. The ingredients contained in the recommended dilutions are not harmful to the environment and the user. Dirt is removed from the surfaces without leaving soapy residue and the sources of odor are destroyed. They show very good germicide, fungicide, bactericide and antiviral action.

Suggested Uses

  • For the cleaning and disinfection of waste bins.

Application

During the preparation stage, dilution is required with water at a ratio of 1: 100 to 1: 200. It is suggested to use personal protective equipment.